- Auto / Manual Control
- Auto / Visual indication of the status
- Easy to install
- Separate models available for single phase, 3 phase & submersible pump set models
- Water level reset switch for convenience
- High & low voltage cut off
- Protection from pump dry run
- One year Warranty
Aqua24 ™ Automatic Water Level controller is designed to automatic control of motor, which ensures constant reserve of water in storage tanks. Aqua24 ™ Automatic water level controller is used to automatically fill the overhead tank as and when it gets empty and monitors the water level.
Aqua24 ™ Automatic water level controller switches ON the motor when the water level in the overhead tank drops below pre fixed low level (on point) and puts off the motor when water level rises up to pre fixed high level (off point) motor also switches off when the sump water is exhausted before filling overhead tank, pump running dry, Mains voltage fluctuations.
State of the art, digital technology, advanced micro controller based products.
The system is very versatile, A number of tailor made variations like control of multiple tanks, or multiple pumps are possible.
Easy installation, Low maintenance, Compact and elegant design, fully automatic, Saves water, motor and energy, Increases pump life, Feather touch keys.
Aqua24 ™ Automatic water level controller will automatically START the pump as soon as the water level falls below the predetermined level (usually 1/2 tank) and shall SWITCH OFF the pump as soon as tank is full or water level in the lower tank is at below minimum level.
Aqua24 ™ Automatic water level controller allows you to decide the water storage levels for operations of the pump in the overhead tank and the sump.
This automatic water level controller is a useful device for homes, hospitals, industries, etc. This product saves water, electricity and time and helps in preventing the overflow of water from the overhead tank, enabling you to efficiently manage your water resource and prevent any wastage. out of three sensors, one sensor is put at the bottom, another is put in the middle, and the third sensor is put at the top level of the tank. When the water level in the tank becomes low, it flows down through the middle sensor and the motor gets switched on automatically, filling up the tank. When the water level increases, the top level sensor senses it and the motor automatically gets switched off without requiring any man power. Automatic Water level controllers are highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies, etc.
Automatic water pump controller does not need any operator since it is automatic. Now, you don’t need to touch your motor switches every day. This system will switch ON / OFF your motor automatically. The sensor switches OFF the motor automatically if the sump is empty. During emergency, use your motor manually at any time. No chances of overflow, current wastage and motor burnout.
Aqua24 ™ Water Level Controller Costs 2,999 Indian Rupees.
Customer support Number for installation process: 9526 107 197
1 year warranty on manufacturing defects
Control both tank underground tank to overhead tank fully automatically
Work with any single phase or submersible motor for home, office, hospital, restaurant
No man power required to operate as fully automatic with 2HP capacity
Longer life no mechanical system, avoid overflow and dry running.